Water damage restoration software
that proves the job is dry.
Water mitigation management in one place: the floor plan, the affected areas with their IICRC S500 Category of water and Class of loss, daily psychrometric and moisture readings against the dry standard, the equipment on site, and the reports the carrier asks for — from a burst pipe in a condo to a flooded basement.
- Category and Class per area, inherited down the building
- Temperature, RH, GPP and dew point, logged daily
- Material moisture pinned to the plan, against the dry standard
- Air movers and dehumidifiers placed on the plan
- Dry log, moisture map and final drying certificate
Structural drying software,
room by room.
Every reading belongs to a place. Renovo models the property as a tree — building, floor, unit, room, wall — so a reading, a photo or a piece of equipment is pinned to where it was taken, and each area knows whether it is wet, drying or dry.
- Category and ClassSet the IICRC S500 Category of water and Class of loss on the loss or on an area; rooms inherit it unless you say otherwise.
- Psychrometric readingsTemperature, relative humidity, grains per pound and dew point for the chamber, the outdoors and the unaffected areas, with the daily drying differentials worked out.
- Moisture monitoring softwareMaterial readings on walls, floors and framing, marked on the plan and compared with the dry standard you set from unaffected material.
- Drying status by areaEach room shows wet, drying or dry, and the day it was signed off dry, so the last wet room is obvious.
- Equipment placementAir movers, dehumidifiers, air scrubbers and heaters placed on the plan, with what was on site at each visit and how many days it ran.
The paperwork,
written by the readings.
Water damage documentation is what gets a drying invoice paid. The reports are drawn from the readings and the plan, not typed up afterwards, and each prints from your own template.
- Daily Dry Log ReportEvery visit's readings, the averages and the drying differentials, per area.
- Moisture Report and Floor Plan Moisture MapReadings on the plan, coloured by status, with the dry standard beside them.
- Psychrometric ReportThe chamber's conditions over the job, so the drying trend is visible at a glance.
- Equipment Setup ReportWhat was placed where, and when it was moved or picked up.
- Final Drying CertificateSigned off when every area reaches its dry standard.
- Work and Emergency AuthorizationsSigned on the phone at the door, or sent by email for an e-signature.
Measure the room
with the phone you have.
The Renovo app scans a room into a floor plan: with LiDAR on iPhones that have it, depth sensing on Android phones that support it, and an on-device AI depth estimate on other phones — or by tapping the corners. The plan carries the moisture readings, the equipment and the containment zones, and its measurements feed the estimate.
Asked
often.
Water damage & mitigation in Renovo, answered.
Is Renovo water mitigation software or job management software?
Both. The drying records sit on the same claim as the schedule, the estimate, the approvals and the invoice, so a water damage job is managed and documented in one place.
Does Renovo follow IICRC S500?
The drying records are organised around what S500 work records: Category of water, Class of loss, psychrometric readings, material moisture against a dry standard, and daily monitoring. Renovo is a tool for keeping those records; it is not certified or endorsed by the IICRC.
Can technicians log readings in the field?
Yes, from the Renovo app or any browser. Readings, photos and equipment are saved against the room they were taken in and are on the office's screen at once.
Does it handle flood and large water losses?
Yes. A loss can hold a whole building — several floors and units — each with its own areas, readings and equipment. See commercial and large loss restoration.
More restoration
software.
The rest of what Renovo does for restoration contractors. See the overview →
See it on one of your own losses.
Bring an assignment email or a recent job, and we'll run it through Renovo on the call.